SDS "PlanStove"

Question: What is the main thing in a heating stove?
Answer: Heating the premises in the most severe frosts, maximum heat dissipation and minimum amount of fuel for these conditions.

The history of the studio

Today, many professional stove-makers agree that bell-type furnaces meet these requirements the most. Such stoves were invented by the Soviet inventor Grum-Grzhimailo (1864-1928), but the efficiency of such stoves was improved by his pupil Podgorodonikov I.S. (1886-1958). Later in the optimization of such stoves Kuznetsov I.V. made his contribution by adding secondary air to the design of the stove for the afterburning of gases, as well as the use of a "dry suture", whose task is to distribute the exhaust gases evenly and to cool gases, not participating in the combustion, left without cooling hot, participating in the combustion.

In addition to heating stoves, there are other types of stoves. What can be said about sauna stoves? In 2002, Kuznetsov heard the idea of ​​new ovens for sauna stoves from Alexei Razorenov, and starting this year he began to practice his developments under the name "NovPar". Further, among the stove-makers, the word "Russauna" began to slip through, from which the new name for the ovens stuck. the tank system released dry steam through pipes, which was more consistent with a sauna, and not a Russian steam room. Of course, such a system requires investments and not everyone likes such steam from tubes (even with the possibility of opening the lid at the heater), so Martsinyuk E.M. decided to simplify and reduce the cost of this design and developed a lightweight version of the oven without pipes, which was named "RusPar," cause this is a normal heater. This system of embedded ovens has become interesting because these sauna ovens are quite easy to repair without having to dismantle the oven itself.

The author of the studio "ProStoves" - Martsinyuk E.M. had good knowledge in computer technology and in 2012 he was invited to Kuznetsov to create an author's website on stove structures kuznetsovstove.com, and since a relative of Martsinyuk E.M. was already a partner of Kuznetsov, then from the same year E.M. Martsinyuk began to study various issues in stove construction and became a participant in the construction of the first stove complex. Thus Martsinyuk E.M. got involved in the construction of furnaces and studied with the entire Kuznetsov team at that time, having worked with different mentors and met Kuznetsov's partners from other cities through participation in Kuznetsov's furnace seminars.

Gradually gaining knowledge from colleagues, the author began to simultaneously develop his own catalog site for the works in which he took part in the construction. Why did you participate? The answer is simple - almost all furnace complexes were made in tandem with different stove-makers. Thus, the site RusStove.com was born, on which the vital activities of Martsinyuk EM were recorded, smoothly transferred into joint work with her relative Martsinyuk MI. In addition to fixing his work, during this time there was a development in the design of the order of the furnaces and thus Martsinyuk E.M. developed a library "Stove constructions" for modern versions of Archicad.

In 2018 Martsinyuk E.M. partly withdrew from joint furnace work with Kuznetsov for family reasons and from that moment there was a turning point in the relationship, tk. up to this point, all orders received only from I.V. Kuznetsov and this year there were practically none. The next couple of years Martsinyuk E.M. and Martsinyuk M.I. held out on old orders and stopped their joint activities, as did the sites RusStove.com, StoveKIV.com, and KuznetsovStove.com (are still active), created by E.M. Martsinyuk.

In 2020, a crisis begins and the removal of citizens from jobs not vaccinated against the virus, which prevents Martsinyuk E.M. to find suitable earnings due to high unemployment.

At the end of 2021, E.M. Martsinyuk decides to create his own studio for the development of furnace structures, because has almost ten years of experience in this business and thus the furnace design studio "PlanStove.com" is born on the local server. After some time of constant improvements to the studio's website and preparation of various legal issues, the long-awaited moment has finally come. 30. 04. 2023 everyone has access to the studio and the opportunity to purchase the projects created at that time. Now the challenge is to develop the studio and attract partners, and for this of course there must be affordable projects and maximum quality, which we are trying to hold. Welcome to our studio! Thank you for the trust! Thank you for being with us!